Konica Minolta bizhub 500 - Manual (Page 29)

2 Before Use
2-4 Network Fax
Be
fo
re
Us
e
Chapter 2
2.3 Operating Environment (IP Address Fax)
2
Note
When using the IP Address Fax function, this requires the service
engineer to make the setting. For details, contact your service
representative.
The IP Address Fax functions can be operated in the following environment:
-
Make sure that this machine is provided optionally with the hard disk, the
image controller and the fax kit. (However, the use of an extension line is
not allowed.)
- [IP Address Fax] in [Utility/Counter] - [Administrator Setting] - [Network
Setting] - [Network Fax Setting] - [Network Fax Function Settings] is set
to [ON].
The IP address fax operates only between model types that are
corresponding to our machine.
No guarantee is given of the operation when using a model type other than
corresponding ones.
2
Reminder
Turning the power OFF/ON repeatedly may cause an fault.
After turning OFF the equipment, wait for more than 5 seconds before
turning it ON again.