Konica Minolta bizhub 500 - Manual (Page 144)

Transmission Applications 7
Network Fax 7-31
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
– Refer to p. 3-43 for more information about Sender Information.
– If the Header Information is set to [OFF], by changing the [Header
Setting] to ON from the Fax screen, Header Information is added to
the [Outside Body Text].
5
When changing the name of a sender, press [ON] in [Change Sender
Name]. Then select the name of a sender you want to change from the
list and press [OK].
– See "Header Information" on page 10-43 for setting the Header
Setting.
6
Press [OK].
The Scan Setting screen will be restored.
7
Press [OK].
The FAX screen will be restored.
8
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-14 for
information about setting functions in the FAX screen. See
"Application Functions Overview" on page 7-4 for information
about setting functions in the FAX Application screen.
9
Designate the destination.
– See "Method for Specifying Addresses" on page 3-22 for
designating the destination.
10
Set the original document.
– See "Placing the Original on the Machine" on page 3-9 for
information about setting the document.
11
Press [Start].
Transmission begins.