Konica Minolta bizhub 500 - Manual (Page 224)

Utility Mode 10
Network Fax 10-43
Utility Mode
Chapter 10
10.15 Header Information
Register the Sender Name and the Fax ID.
Header Information
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2
Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
Item Description Available value
Sender Name The name registered is printed on the doc-
ument received by the other party as a
sender information. Up to 30 in characters
and symbols.
Sender Fax No. The Fax ID registered is printed on the doc-
ument received by the other party as a
sender information.
The FAX number of the machine is normally
entered. Up to 20 characters
with 0 to 9, +, space, *
and # used.
Sender Name
Registration Up to 20 sender names are registered. The
sender names thus registered can be se-
lected while in the transmission. -