Konica Minolta bizhub 500 - Manual (Page 192)

Utility Mode 10
Network Fax 10-11
Utility Mode
Chapter 10
10.2.13Administrator Setting >> Fax Setting >> Header/Footer
Position
Set the method of specifying the sender information and the reception
information. (page 10-46)
*1
The setting value is different depending on the country.
10.2.14Administrator Setting >> Fax Setting >> Telephone Line
Settings
For the IP address fax function, set the [Number of Redial] and the [Redial
Interval]. These are normally shared with the fax function. For details of other
items related to the Telephone Line Setting, see "User's Guide (Facsimile
Operations). (page 10-49)
*1
The setting value is different depending on the country.
Item Description Available value
Header Posi-
tion
*1
Set a position in which the sender infor-
mation is printed. Inside Body Text / Out-
side Body Text
*
/ OFF
Footer Position Set the reception time and the reception
number if they are printed or not on the
document received. Inside Body Text / Out-
side Body Text / OFF
*
Item Description Available value
Number of Re-
dials
*1
Set the number of redials when no re-
sponse is available due to the other party
being busy. 0-7 (3 times
*
)
Redial Interval Set the intervals between the redials. 1-15 (3 min.
*
)