Konica Minolta bizhub 500 - Manual (Page 219)

10 Utility Mode
10-38 Network Fax
Utility Mode
Chapter 10
10.13 Network Fax Function Settings
Set items related to the network fax.
*
indicates factory default setting.
Network Fax Function Settings
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2
Press [Network Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Network
Setting], enter 5 through the numeric keypad.
3
Press [Forward].
Item Description Available value
Network Fax
Function Set-
ting IP Address Fax When the IP Address Fax is
used, a setting is made to ON. ON / OFF
*
Network Fax
Function Set-
ting Internet Fax When the Internet fax is used, a
setting is made to ON. ON / OFF
*