6 specifications, 1 specifications (internet fax), Specifications – Konica Minolta bizhub 500 User Manual
Page 111: Specifications (internet fax) -2, 6specifications, Sp ecific ations chap te r 6
6
Specifications
6-2
Network Fax
S
p
ecific
ations
Chap
te
r 6
6
Specifications
6.1
Specifications (Internet Fax)
Main product specifications relating to internet fax functions are indicated
below.
Specifications are subject to change without notice.
Item
Specifications
Image memory capacity
27 GB* (27 GB of 40 GB of the hard disk is used as a
memory.)
Max. no. of stored pages
Approx. 9000 pages*
(numbers of pages in the case of storing standard A4-
size pages containing approximately 700 characters at
“fine” resolution)
Scanning line density
Ultra Fine:
600 dpi × 600 dpi
Super Fine:
400 dpi × 400 dpi
Fine:
200 dpi × 200 dpi
Normal:
200 dpi × 100 dpi
Transmission mode
(File Type)
monochrome (TIFF)
Transmission coding methods
TIFF-S (MH), TIFF-F (MR/MMR)
Max. scanning size
A3 (420 mm × 297 mm)
Width: 297 mm
Length: MAX. 1000 mm
(When the resolution is 600 dpi: Maximum 432 mm)
Max. recording size
A3 (420 mm × 297 mm)
Originals in excess of 1000 mm cannot be received.
(When the resolution is 600 dpi, it is not possible to re-
ceive an original longer than 460 mm.)
When receiving originals longer than the paper size in
the paper trays, printing is made according to the set-
ting of [Print Separate Fax Pages].
Treatment of
transmission error
Mail transmitted
again.
None
Internet FAX Rx
Error Report
When documents cannot be sent to the SMTP server,
transmission error report to be printed/not printed can
be set.
When MDN/DSN response is received, to be print-
ed/not to be printed can be set.
When MDN/DSN response is received, transmission
result is indicated on the transmission control report.
MDN/DSN response monitoring time can be set in the
range from 0 to 99 hours.