Konica Minolta bizhub PRESS C1100 - Manual (Page 99)

7-10
bizhub PRESS C1100/C1085
7
) In a Macintosh environment
Tips
To carry out this task, the computer's administrator privilege is required.
A
Select [About This Mac] - [More Info…] to check [IP Addresses] and [User name].
B
Enable file sharing.
In the Apple menu, click [System Preferences...] - [Sharing] to open the [Sharing] window, then select the
[File Sharing] check box.
C
Enable the SMB-base sharing.
Click [Options] on the [Sharing] window, select the [Share files and folders using SMB (Windows)] check
box, then select the check box of the login user name (displayed name).
D
Set to a shared folder.
Click [+] on the [Sharing] window, select a folder to be shared, then click [Add]. Then, check that the user
name and access rights of the folder are set to the [Read & Write] mode.
Step 2: Connect this machine to the network
To connect this machine to the network, check that:
- The LAN cable is connected.
- The IP address is assigned to this machine.
Tips
To configure the network settings, select [Administrator Setting] - [Network Setting] - [NIC Setting]. For details, refer
to the HTML User's Guide.
Step 3: Prepare the operating environment for SMB transmission
Enable the SMB transmission function.
- Set [SMB Send Setting] of this machine to [Enable] (in general use, you do not need to change the default
setting).
- When the Image Controller IC-602 and Mac OS X 10.7 or later are used, the following setting is required.
- NTLM Setting
The NTLM setting is only available for v2.
- Date and time setting of this machine and computer
Specify the date and time, including the time zone.
Tips
For details, refer to the HTML User's Guide.
Step 4: Configure settings according to your environment
Register destinations that are frequently used.
- This can save many steps to manually enter destinations.
- Select [SCAN] screen of this machine to register the SMB server.
- You can also use [Scan Address Register] in [UTILITY] to register the setting.
Tips
For details about how to register destinations, refer to the HTML User's Guide.