Konica Minolta bizhub PRESS C1100 - Manual (Page 12)

1-2
1.1 Turning the Power ON/OFF
Tips
If [Machine is warming up] is displayed on the [MACHINE] screen, it indicates that this machine is in the warm-up state.
Warm-up processing takes approximately eight minutes.
) Turning the power off
A
Turn off the sub power switch.
The touch panel display is cleared, and the Power LED on the
control panel is changed from green to red.
NOTICE
NOTICE
While the following message is displayed, do not turn off the main
power switch. Otherwise, a problem such as a toner fixation in the
machine may occur.
[Cooling in progress / Power is turned off automatically]
[Power off in progress / Please do not turn the main power off]
B
Turn off the main power switch.
NOTICE
NOTICE
When turning the main power switch off then on, be sure to wait for 10
seconds or longer before turning the main power switch on again. If the
main power switch is turned on again within 10 seconds, the machine
may not function normally.
ON OFF
ON OFF