Particular adjustment, Particular adjustment -27 – Konica Minolta bizhub PRESS C1100 User Manual
Page 72
5-27
5.2
Image Quality Adjustment
Particular adjustment
If a particular adjustment is required, for example, before printing out an image with a higher level of quality or when
the expected chromogenic effect has not been obtained as expected, adjust the following items:
Reference
For details about the adjustment procedure, refer to the HTML User's Guide.
NOTICE
NOTICE
Precaution on using [Color Density Control]
To use [Each Paper Type Color Adj.] in [Color Density Control], carry out [Each Paper Type Color Adj.] before starting
this procedure, then configure a tray setting.
For details, refer to the HTML User's Guide.
Ad-
just-
ment
order
Menu item
Description
Tips
1
Gamma Automat-
ic Adj.
Adjusts the curve of the output density against the in-
put density.
This affects the brightness and contrast.
On the [MACHINE] screen, select [Adjustment] - [Exe-
cute Adjust Operation] - [Gamma Automatic Adj.] to
execute processing.
HTML User's Guide
2
Maximum Density
Adjustment
Changes the maximum density adjustment value
when the measurement density that was obtained af-
ter calibration does not match the reference adjust-
ment value.
[Administrator Setting] - [System Setting] - [Expert
Adjustment] - [Process Adjustment] - [Maximum Den-
sity Adjustment]
HTML User's Guide
3-a
Color Density
Control (recom-
mended)
Executes automatic calibration.
On the [MACHINE] screen, select [Adjustment] -
[Color Density Control] - [Basic Setting] or [Color Den-
sity Manual Control] to carry out the adjustment.
3-b
Printer controller
calibration (When
[Color Density
Control] is not
used)
Executes manual calibration when [Color Density
Control] is not used.
Use Color Centro.