Konica Minolta bizhub PRESS C1100 - Manual (Page 49)

5-4
bizhub PRESS C1100/C1085
5
G
Press [Exit Print Mode].
H
Measure the line length at each of points
[1] to [8] on the printed-out chart using a
scale.
- The figure on the right illustrates an example
to measure points [1] and [5]. As illustrated in
this example, measure the line length at each
printed point.
- The measurement value can be entered in
units of up to 0.1 mm.
- Write down the measured lengths so that you
do not forget them.
[ 1 ]
[ 5 ] [ 7 ]
[ 6 ] [ 8 ]
[ 2 ]
[ 3 ] [ 4 ]
[ 1 ]
[ 5 ]