Konica Minolta bizhub PRESS C1100 - Manual (Page 59)

5-14
bizhub PRESS C1100/C1085
5
) Executing calibration
The adjustment method varies depending on whether or not the [Color Density Control] function is used.
When [Color Density Control] is used (recommended): Select
[Color Density Control] to carry out the adjustment. Setting this function to ON executes calibration at periodic intervals
(page 5-14).
When [Color Density Control] is not used:
Use Color Centro and a colorimeter to carry out the manual adjustment (page 5-19).
Tips
If the image quality with higher accuracy is required, you can use the adjustment method with [Gamma Automatic Adj.],
[Maximum Density Adjustment], or [Color Density Manual Control] added. For details, refer to the HTML User's Guide.
Color Density Control
Using the Color Density Control function, you can configure a setting so that this machine automatically executes
calibration at periodic intervals.
Calibration is executed every arbitrarily specified number of sheets, and you can keep printing using the appropriate
density.
Tips
The printed chart is included in the print count.
) Auto setting of Color Density Control
A
Press [Adjustment] on the [MACHINE]
screen.
B
Press [Color Density Control].