Konica Minolta bizhub PRESS C1100 - Manual (Page 101)

7-12
bizhub PRESS C1100/C1085
7
7.4 Major Specifications
NOTICE
NOTICE
The specifications of the machine and optional device are subject to a change without notice.
Even if the specified paper size and weight are compatible with an optional device, if they are not supported by the
entire system including the machine, the paper may not be able to be used.
Some optional devices are not supported in certain regions.
Machine
Feeding-related optional devices
Reference
The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed
conditions or specifications, refer to the HTML User's Guide.
) Paper Feeder Unit PF-707
The Paper Feeder Unit PF-707 can be used as the first paper feeder unit or when the Feed Adjuster FA-502 is
connected, it can be used as the second or successive paper feeder units. When combined with other units, the Paper
Feeder Unit PF-707 can be connected as the first, second, or third unit.
Specifications
Operating environment con-
ditions Temperature: 10 to 30 degrees Centigrade
Humidity: 10 to 80%RH
Paper weight Plain, Fine, Color Specific: 55 g/m
2
to 350 g/m
2
/ 13 lb Bond to 93 lb Bond
Coated-GL, ML, GO, MO: 81 g/m
2
to 350 g/m
2
/ 22 lb Bond to 93 lb Bond
Paper size • SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, B6 w, A6 w
12 e 18 w, 13 e 19 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w/v, 8K
w, 16K w/v, Foolscap*
• Custom: Width 100 mm to 330.2 mm, Length 139.7 mm to 487.7 mm / Width
3.94" to 13", Length 5.83" to 19.2"
• Tab Paper: A4T v, 8.5 e 11T v
*Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, or 8 e 13 w.
Paper tray
1: Tray 1, 4, 7 (upper tray)
2: Tray 2, 5, 8 (middle tray)
3: Tray 3, 6, 9 (lower tray)
* Tray numbers 1 to 3 refer to the tray numbers when the Paper Feeder Unit PF-707 is mounted as the first paper
feeder unit. Tray numbers 4 to 6 refer to the tray numbers when the Paper Feeder Unit PF-707 is mounted as the
second paper feeder unit, and tray numbers 7 to 9 refer to the tray numbers when it is mounted as the third paper
feeder unit.
1
2
3