Konica Minolta bizhub PRESS C1100 - Manual (Page 43)

4-9
bizhub PRESS C1100/C1085
4
) [Color Mode]: 2-Color Printing
To print process colors (CMYK) using Spot Colors (Special colors), open [Color Mode] in the Print Setting screen, then
specify the colors to be used in [2-Color Printing].
In 2-Color Printing, process colors (CMYK) can be replaced with Spot Colors (Special colors) for printing. To specify
each color, enter the spot color name into the text box on the right-hand side of the selected color. You can specify
each of four colors accordingly. For Example, you can replace only one color with a corporate color or one color of 2-
color printing with a spot color.
Use example: Replace magenta and cyan with the respective spot colors (special colors).
Tips
A spot color name is indicated by "prefix + color name". For example, if the prefix is set to "DIC" and the color name
to "100", the spot color name is indicated by "DIC 100". Be sure to insert a space between prefix and color name.
Reference
If [Spot Color] is selected in Color Centro, a spot color table can be created or edited. For details, refer to the HTML
User's Guide.