Konica Minolta bizhub PRESS C1100 - Manual (Page 71)

5-26
bizhub PRESS C1100/C1085
5
Carry out the adjustment continuously in sequence. If you have interrupted the adjustment, select "2. Gamma
Automatic Adj." to execute automatic gamma adjustment each time before restarting calibration. For example, if you
have interrupted the adjustment at the end of the "3. Density Balance Adjustment" processing, select "2. Gamma
Automatic Adj." - "4-a. Color Density Control (recommended)" or "4-b. Calibration by image controller (when [Color
Density Control] is not used)" to restart the adjustment.
If sufficient adjustment results are not obtained via daily maintenance, also carry out the adjustment in this order.
For details about the setting procedure, refer to the HTML User's Guide.
NOTICE
NOTICE
If the setting value is changed in the [Custom Screen], hue may fluctuate significantly. To manage the hue fluctuation,
specify the standard image quality following the procedure if you changed the setting value.
Tips
Exact Color and G7 Calibration, which are high-level calibration functions, are set so that either one of them is
available. If you want to change the function, contact your service representative.