Konica Minolta bizhub C35 - Manual (Page 354)

Configuring the Printer 8-87
[IPsec Peer Settings] ([Edit])
The [Security] - [IPsec] - [IPsec] - [IPsec Peer Settings] - [Edit] page allows
you to configure the following items.
[Authentication Algo-
rithm for AH] When [Security Protocol] is set to [AH], select the
AH authentication algorithm.
Choices: [MD5], [SHA-1]
Default: [MD5]
Item Description
[No.] Displays the number to be registered.
[Encapsulation Mode] Select the operation mode of IPsec.
Choices: [Not Use], [Tunnel Mode], [Transport
Mode]
Default: [Not Use]
[Peer's Address] Specify the IP address of the peer.
Range: 2 to 39 characters
Default: [Blank]
"
An IPv4 or IPv6 address can be specified.
Item Description