Konica Minolta bizhub C35 - Manual (Page 172)

Printing With NetWare 3-5
– [Ethernet Frame Type]:
Select [Auto]. (Select the frame type according to the network
environment.)
– [NetWare Print Mode]: Select [PServer].
– [Print Server Name]:
Specify the print server name created in step 4.
– [Print Server Password]:
Specify only when setting from the NetWare server.
– [Print Queue Scan Rate]: Specify 1. (Change as necessary.)
– [Bindery/NDS]: Select [Bindery/NDS].
– [Preferred File Server]:
Specify the name of the file server that connects to the Pserver.
7
Restart the printer (turn the printer off, then on again).
8
Use the NetWare server console to load MONITOR.NLM.
9
Select the connection information and, in the active connection column,
check that the created Pserver is connected.
For NetWare 4.x Remote Printer Mode (NDS)
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Select either the organization or organizational unit container that offers
the print service, and then click [Print Services Quick Setup] on the [Tools]
menu.
4
Enter the appropriate names in the [Printer Server Name], [Printer Name],
[Print Queue Name], and [Print Queue Volume] fields, select [Other/
Unknown] from the [Printer type] field, and then save the specified set-
tings.
"
For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.