Konica Minolta bizhub C35 User Manual
Page 175
Printing With NetWare
3-8
–
[Ethernet Frame Type]:
Select [Auto]. (Select the frame type according to the network
environment.)
–
[NetWare Print Mode]: Select [PServer].
–
[Print Server Name]: Specify the print server name created in step
4.
–
[Print Server Password]: Specify only when setting from the
NetWare server.
–
[Print Queue Scan Rate]: Specify 1. (Change as necessary.)
–
[Bindery/NDS]: Select [NDS].
–
[Preferred NDS Context Name]:
Specify the name of the context that connects to Pserver.
–
[Preferred NDS Tree Name]:
Specify the name of the tree that Pserver logs on to.
6
Restart the printer (turn the printer off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection column,
check that the created Pserver is connected.
For NetWare 5.x/6 Novell Distributed Print Service
(NDPS)
"
Before specifying settings for NDPS, check that the NDPS broker and
NDPS manager have been created and loaded.
"
Also, before performing the following procedure, check that the TCP/
IP protocol has been set in the NetWare server, and check that the IP
address has been set for this machine and that this machine is on.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Right-click the organization or organizational unit container where you will
create the printer agent, and then click [NDPS Printer] on the [Create]
submenu.
4
In the [NDPS Printer Name] box, enter the printer name.
5
In the [Printer Agent Source] column, select [Create a New Printer Agent],
and then click the [Create] button.
6
Check the printer agent name, and then in the [NDPS Manager Name]
box, browse through the NDPS manager names, and register one.