Ethernet] (admin settings), Ethernet] (admin settings) -4, Ethernet] (admin settings) 5-4 – Konica Minolta bizhub C35 User Manual
Page 183
[Ethernet] (Admin Settings)
5-4
[Ethernet] (Admin Settings)
If the machine is connected to a network, the following settings should be
specified.
For details about each setting, contact your network administrator.
Item
Description
[TCP/IP]
Specify settings for the machine's network connec-
tion (TCP/IP).
[Enable]
Select whether or not to enable TCP/IP.
Default: [Yes]
"
If [No] is selected, the TCP/IP parameters
do not appear.
[IP Address]
Specify the IP address used by this machine on
the network.
[Subnet Mask]
Specify the subnet mask.
[Gateway]
Specify the gateway address.
[DHCP]
If there is a DHCP server on the network, select
whether the IP address and other network infor-
mation are automatically assigned by the DHCP
server.
Default: [OFF]
[BOOTP]
If there is a BOOTP server on the network, select
whether the IP address and other network infor-
mation are automatically assigned by the BOOTP
server.
Default: [OFF]
[ARP/PING]
Select whether or not the ARP/PING command is
used when the IP address is assigned.
Default: [OFF]
[HTTP]
Select whether or not to enable HTTP.
Default: [Enable]
[FTP]
Select whether or not to enable the FTP server.
Default: [Enable]