Konica Minolta bizhub C35P - Manual (Page 87)

Configuration Menu Overview 4-44
"
If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the
password must be entered in order for the contents of INTERFACE
MEMU
to be displayed.
For details on LOCK PANEL, refer to “SYS DEFAULT MENU” on
page 4-49.
"
All factory default values are shown in bold.
JOB
TIME-
OUT
Settings
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NET
TCP/IP ENABLE
Settings
YES /NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IP
ADDRESS
Setting
000.000.000.000
Set the IP address for this printer on the
network.
Use the , , , and keys to
specify the value.
If the IP address is manually specified,
DHCP , BOOTP and ARP/PING are
automatically set to OFF .
SUBNET
MASK
Setting
000.000.000.000
Specify the subnet mask for the network.
Use the , , , and keys to
specify the value.
DEFAULT
GATEWAY
Setting
000.000.000.000
Specify the IP address of the router if
one is on the network. Use the , ,
, and keys to specify the value.
DHCP
Settings
ON /OFF
Select whether or not the IP address is
automatically acquired.
If ON is selected, the IP address is auto-
matically acquired.
If OFF is selected, the IP address is not
automatically acquired.