Status, error, and service messages, Standard status messages, Status, error, and service messages -36 – Konica Minolta bizhub C35P User Manual
Page 241: Standard status messages -36, Status, error, and service messages 9-36
Status, Error, and Service Messages
9-36
Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel mes-
sage window. They provide information about your printer and help you locate
many problems. When the condition associated with a displayed message
has changed, the message is cleared from the window.
Standard Status Messages
This message...
means...
do this...
CALIBRATING
After replacing a toner car-
tridge or a imaging unit, or
after rebooting your printer
after environmental
changes, your printer auto-
matically pauses to do an
Auto-Image Density Control
(AIDC) cycle. This process
is provided to make reliable
printer operation with opti-
mum output quality possible.
No action needed.
CANCELLING JOB
The job is being cancelled.
COPYING
The printer is printing with
the collating function.
ENERGY SAVER
The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power.
FIRMWARE UPDATE
The firmware is being
updated.
INITIALIZING
The printer is being initial-
ized.
PRINTING
The printer is printing.
PROCESSING
The printer is processing
data.
READY
The printer is on and ready
to receive data.