Konica Minolta bizhub C35P User Manual
Page 29
Selecting Driver Options/Defaults (for Windows)
2-8
5
Click the Refresh to automatically configure installed options.
"
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
If Windows 7, Server 2008 R2, Vista or Server 2008 is being used,
Refresh can also be clicked when the machine is connected via
USB.
6
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
"
If Printer Memory is selected, select 256 MB or 768 MB accord-
ing to the installed memory. The factory default setting is 256 MB.
"
If Memory Card is selected, select Disable, or Enable (1 GB
Over), according to the installed CompactFlash card.
7
Click Apply.
"
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
8
Select the General tab.
9
Click Printing Preferences.
Printing Preference dialog box appears.
10
Select the default settings for your printer, such as the default media for-
mat you use, in the appropriate tabs.
11
Click Apply.
12
Click OK to exit from the Print preference dialog box.
13
Click OK to exit from the Properties dialog box.