Konica Minolta bizhub C35P - Manual (Page 28)

Selecting Driver Options/Defaults (for Windows) 2-7
Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
Windows 7/Server 2008 R2/Vista/Server 2008/XP/Server
2003/2000
1
Choose the driver’s properties as follows:
– (Windows 7/Server 2008 R2)
From the Start menu, click Devices and Printers to open the Devices
and Printers directory. Right-click the KONICA MINOLTA bizhub C35P
PCL6, KONICA MINOLTA bizhub C35P PS or KONICA MINOLTA
bizhub C35P XPS printer icon, and then click Printing preferences.
– (Windows Vista/Server 2008)
From the Start menu, click Control Panel, then Hardware and
Sound, and then click Printers to open the Printers directory.
Right-click the KONICA MINOLTA bizhub C35P PCL6, KONICA
MINOLTA bizhub C35P PS or KONICA MINOLTA bizhub C35P XPS
printer icon, and then click Properties.
– (Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
bizhub C35P PCL6 or KONICA MINOLTA bizhub C35P PS printer
icon and choose Properties.
– (Windows 2000)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA bizhub C35P
PCL6 or KONICA MINOLTA bizhub C35P PS printer icon and choose
Properties.
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3
Select the Configure tab.
4
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.