Configuration menu overview 4-19 – Konica Minolta bizhub C35P User Manual
Page 62
Configuration Menu Overview
4-19
LOGICAL
TRAY
0-9
Settings
PHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for
LOGICAL
TRAY 1
is
PHYSICAL TRAY1
. The
default setting for all other trays is
PHYS-
ICAL TRAY2
.
"
PHYSICAL TRAY3
appears only if
an optional lower feeder unit
PF-P09 is installed.
DUPLEX
Settings
OFF
/LONG EDGE/SHORT EDGE
If
LONG EDGE
is selected, the pages will be printed on both sides
of the paper for long-edge binding.
If
SHORT EDGE
is selected, the pages will be printed on both
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu
setting.
COPIES
Settings
1
-9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu
setting.
COLLATE
Settings
ON/OFF
If
ON
is selected, all pages of the document are printed before the
next copy is printed.
If
OFF
is selected, all copies of the document are not printed
separately.
The setting specified in the printer driver will override this menu
setting.
"
This menu item appears only if an optional hard disk kit
HD-P03 or a CompactFlash card is installed.