Konica Minolta bizhub C35P - Manual (Page 125)

Media Types 6-6
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
You can print continuously with envelopes. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Use envelopes that are
„ Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
„ Approved for laser printing
„ Dry
DO NOT use envelopes that have
„ Sticky flaps
„ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
„ Transparent windows
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Driver
Media Type Thick 1 (91–150 g/m 2 )
Thick 2 (151–210 g/m 2 )
Weight 91–210 g/m²
Duplexing See page 100 for supported sizes
Capacity Tray 1
(Manual Feed
Tray) Up to 10 envelopes, depending on their
thickness
Tray 2/3 Not supported
Orientation Face down
Driver
Media Type
Envelope
Duplexing Not supported