Konica Minolta bizhub C35P - Manual (Page 248)

Status, Error, and Service Messages 9-43
PAPER JAM
FUSER/EXIT
Media has misfed
leaving the fuser
area.
Press the key to dis-
play the help screen.
Follow the instructions in
the help screen to
remove misfed media.
The enclosed toner
cartridges and imag-
ing units are not
installed. Be sure to install the
enclosed toner car-
tridges and imaging
units.
I-UNIT END
REPLACE
X
The X Imaging unit
has completely
reached the end of its
life. Replace the Imaging
unit.
I-UNIT MISSING
CHECK X
The X imaging unit is
not installed, or an
unapproved imaging
unit is installed. Install a correct KONICA
MINOLTA imaging unit.
TONER OUT
REPLACE X
The X toner cartridge
is completely empty. Replace the toner car-
tridge.
TONER MISSING
CHECK X
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed. Install a correct KONICA
MINOLTA toner car-
tridge.
TRAY X EMPTY
“SIZE”
“MEDIA”
The X (Tray 1, 2 or 3)
was specified with the
printer driver for print-
ing, but Tray X is
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF .
Load the correct media
into the specified tray.
This message... means... do this...