Konica Minolta bizhub C35P - Manual (Page 194)

Maintaining the Printer 8-3
„ Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the imaging units.
„ Do not open the printer during printing.
„ Do not tap media stacks on the printer.
„ Do not lubricate or disassemble the printer.
„ Do not tilt the printer.
„ Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the printer and cause the print quality to deteriorate.
„ Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
„ Make sure two people are avail-
able to lift the printer when mov-
ing it.
Keep the printer level to avoid
toner spillage.
„ When lifting the printer, fold up
Tray 1, and then lift the printer as
shown in the illustration at the
right.
If the optional lower feeder unit
PF-P09 is installed, move it and
the printer separately. Do not
grasp the grip of Tray 3, or the
right side cover; otherwise, the
lower feeder unit may be damaged.
„ If you get toner on your skin, wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
„ Make sure any parts removed during cleaning are replaced before you
plug in the printer.
27 kg
60 lbs