Konica Minolta bizhub C35P - Manual (Page 246)

Status, Error, and Service Messages 9-41
Error Messages (Operator Call: )
This message... means... do this...
COVER OPEN
FRONT COVER
The printer’s front
cover is open. Close the front cover.
COVER OPEN
SIDE COVER
The printer’s right
side cover is open. Close the right side
cover.
COVER OPEN
TRAY3 COVER
The right side cover
of Tray 3 is open. Close the right side
cover of the tray.
HOLD JOB ERROR
UNABLE TO
STORE JOB
The specified print job
saved on the hard
disk is sent while the
hard disk is not
installed. Print jobs can be saved
only if a hard disk is
installed. If desired,
install a hard disk.
HOLD JOB ERROR
“OPTIONAL”
PRESS CANCEL
When printing a
stored job, the printer
configuration was
changed since the job
was stored. Change the printer con-
figuration to that when
the job was stored.
MANUAL EMPTY
“SIZE”
“MEDIA”
Tray 1 was specified
with the printer driver
as Manual Feed for
printing, but Tray 1 is
empty. Load the correct media
into Tray 1.
MANUAL FEED
“SIZE”
“MEDIA”
The Paper Source in
the printer driver is
set to Tray 1 (Manual
Feed), but there is
already media in the
tray when printing
begins.
Press the key to
print, or remove and
reload the media in Tray
1.
MEMORY FULL
PRESS CANCEL
The printer has
received more data
than can be pro-
cessed with its inter-
nal memory. Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed, and
then try printing again.
If that doesn’t solve the
problem, install an
optional memory mod-
ule.