Konica Minolta bizhub C35P - Manual (Page 101)

Configuration Menu Overview 4-58
AUTO
CON-
TINUE
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If
AUTO CONTINUE
is set to
ON
, printing automatically contin-
ues after about 10 seconds under the following conditions. At
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (page 9-42)/TRAY EMPTY (page
9-43)
Different media size/type: PAPER ERROR (page 9-42)/TRAY x
PAPER ERR (page 9-44)
HOLD
JOB
TIME-
OUT
Settings
DISABLE /1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If
DISABLE is selected, print jobs are not deleted
at a specific time.
ENERGY
SAVER
TIME
Settings
5 minutes/6 minutes/7 minutes/8
minutes/9 minutes/10 minutes/11
minutes/12 minutes/13 minutes/14
minutes/15 minutes/30 minutes/
1 hour/3 hours
Specify the length of time until the machine enters Energy
Saver mode.
MENU
TIME-
OUT
Settings
OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If
OFF is selected, no
timeout occurs.
LCD
CON-
TRAST
Settings
-3/-2/-1/0/+1/+2/+3
Adjust the contrast of the message window.
The darkest level setting is -3 and the brightest level setting is
+3 .