Konica Minolta bizhub C550 - Manual (Page 63)

Installing the printer driver 2
C550 2-19
For Windows XP/Server 2003
1
After using a USB cable to connect this machine to a computer, turn
the computer on.
– Do not disconnect or connect the cable while the computer is start-
ing up.
2
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
3
Turn the main power of this machine on.
– If the Add New Hardware Wizard does not start up, turn the main
power off, then on again.
– When turning the power off, then on again, wait at least 10 seconds
before turning the power on again; otherwise, this machine may not
function properly.
The Found New Hardware Wizard dialog box appears.
4
Select “Install from a list or specific location (Advanced)”, and then
click the [Next] button.
– If the Windows connect to Windows Update dialog box appears,
select “NO”.
5
From “Search for the best driver in these locations”, select “Include this
location in the search”, and then click the [Browse] button.
6
Specify the desired folder on the CD-ROM that contains the printer
driver, and then click the [OK] button.
– Select the specified folder according to the printer driver to be
used, the operating system, and the language.
– Printer drivers that can be selected: Windows XP/Server 2003: PCL
driver, PS driver, Fax driver
7
Click the [Next] button, and then follow the on-screen instructions.
– When the Digital Signature dialog box appears, click the [Continue]
button.
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed
printer appears in the Printers and Faxes window.
10
Remove the CD-ROM21 from the CD-ROM drive.
This completes the printer driver installation.