Konica Minolta bizhub C550 - Manual (Page 239)

Setting up the PostScript driver (Windows) 6
C550 6-44
Specifying the paper tray
You can register the paper size, paper orientation, and paper type for the pa-
per that is loaded in a paper tray.
2
Reminder
If the paper loaded in this machine and the paper specified from the print-
er driver are different, printing cannot be performed correctly. Be sure to
make the proper settings.
1
Click the Configure tab.
2
Click the [Paper Tray Settings] button.
The Paper Tray Settings dialog box appears.
3
Select the desired tray in “Paper Tray Information”, and then specify
the paper size, paper orientation, and paper type.
4
Click the [OK] button.
2
Note
The paper type for a paper tray can also be specified from the Basic tab.
For details, refer to “Specifying the Basic tab settings” on page 6-7.
Specify “Duplex Side 2” to print on the back side of a page.