Konica Minolta bizhub C550 - Manual (Page 204)

Setting up the PostScript driver (Windows) 6
C550 6-9
– Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.
Selecting the paper tray
You can specify the paper you want to use for printing by selecting the paper
tray that contains the loaded paper.
1
Click the Basic tab.
2
From the “Paper Tray” drop-down list, select the desired paper tray.
2
Note
If “Auto” is specified as the paper tray, you can select the paper type. If
the paper tray setting is changed to a setting other than “Auto”, the paper
type is fixed to its preregistered setting. Specify a paper type by clicking
the [Paper Settings for Each Tray] button. For details, refer to “Specifying
the paper type for a paper tray” on page 6-9.
Specifying the paper type for a paper tray
You can specify the paper type for a paper tray.
1
Click the Basic tab.
2
Click the [Paper Settings for Each Tray] button.
The Paper Settings for Each Tray dialog box appears.