Konica Minolta bizhub C550 - Manual (Page 31)

Overview of the User Box functions 1
C550 1-9
5 [Utility/Counter] key Press to display the Utility screen and the Meter
Count screen.
6 [Reset] key Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
7 [Interrupt] key Press to enter Interrupt mode. While the machine
is in Interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message “Now in In-
terrupt mode.” appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key
again.
8 [Stop] key Pressing the [Stop] key during scanning temporar-
ily stops the scan operation.
9 [Proof Copy] key Press to print a single proof copy to be checked
before printing a large number of copies.
Press the [Proof Copy] key before scanning or cop-
ying, the result can be viewed on the touch panel.
!
Detail
This key cannot be used if the [User Box]
key was pressed to save a document.
To preview a document being saved in a
user box, press the [Fax/Scan] key. For
details on previewing, refer to the User’s
Guide [Network Scanner Operations].
10 [Start] key Press to start scanning. When this machine is
ready to begin to scan, the indicator on the [Start]
key lights up in blue. If the indicator on the [Start]
key lights up in orange, the operation cannot be
started.
Press to restart a stopped job.
11 Data indicator Flashes in blue while a print job is being received.
Lights up in blue when data is being printed.
12 [C] (clear) key Press to erase a value (such as the number of cop-
ies, a zoom ratio, or a size) entered using the key-
pad.
13 Keypad Use to type in the number of sets to be copied.
Use to type in the zoom ratio.
Use to type in the various settings.
14 [Help] key Press to display the Help screen. From this screen,
descriptions of the various functions and details of
operations can be displayed.
15 [Enlarge Display] key Press to enter Enlarge Display mode. If authentica-
tion is performed with PageScope Authentication
Manager, it does not enter Enlarge Display mode.
16 [Accessibility] key Press to display the screen for specifying settings
for user accessibility functions.
No. Part name Description