Konica Minolta bizhub 751 - Manual (Page 96)

751/601 6-6
Use Document 6
Offset
Specifies offset to separate the copies or pages of the document. If a finisher is installed, the printed pages
are fed out with each copy shifted to separate it.
If no finisher is installed, the printed pages are fed out sorted in an alternating crisscross pattern.
Staple
The display is made when the finisher is installed optionally. Selects one of these settings to bind copies with
a staple in the corner or with two staples.
Staple - Position Setting
When you select a staple type, you can specify the position.
Punch
The display is made when the finisher optionally installed is provided with a punch kit. Selects the setting to
punch holes for filing.
Punch - Position Setting
Specifies the punch position.
Face Up
Outputs the printouts with the printed sides facing up.
Fold/Bind
When [Fold/Bind] is displayed by the installed finisher, the following items can be specified.
Item Description
Half-Fold Select this option to fold copies in half before feeding them out.