Konica Minolta magicolor plus - Manual (Page 7)

E-7
Package Contents
Captureboard, main unit [1]
See “Assembly and Setup Manual” for information about
the assembly parts of the Captureboard.
Printer* [1]
Please see the instruction manual of the printer for infor-
mation about the printer accessories.
Stand* [1]
* The printer and stand may be sold separately.
* Depending on the product you have purchased, the printer and
stand may be sold separately.
The package contents are as described below. Please check before use.
• USB cable (type B ↔ type A) [1]
[PLUS code 715255400]
This cable is for connecting the Captureboard's Printer
connector with the exclusive printer (page E-13).
(If not using a printer, it can be
used to connect a computer. For
connection instructions, see the
separate "Software Operation
Manual".)
• AC power adapter (with power cord) [1]
This is the power adapter for supplying power to the
Captureboard (See Page E-13).
(HEC-AP065-24V)
• Dedicated eraser (with 2 spare sponges) [1]
Use this to erase the drawing.
Captureboard Accessories
• Dedicated markers
(One each of black, red, blue, and
green)
Use these markers to draw on the
sheet surface.
Documents
• User’s manual [1] (this manual)
Includes information about safety precautions and the
use of the Captureboard.
• Software Operation Manual ... 1
Includes information on setting and using the capture-
board software.
• CD-ROM [1]
This includes the user's manual (in PDF format) and
special software for using the Captureboard (PLUS
TOOLBOX).
• Quick Guide [1 set]
The Quick Guide can be hung from a hook in a conve-
nient location close to the Captureboard.
• Assembly and Setup Manual
Information covers the setup of the Captureboard and
the connections with the printer.
• Test printing paper (5 sheets)
Use these to make connection tests when connecting
a printer.
• Cleaning cloth (1)
Assembly and installation parts
• Wall mount brackets [1 set]
These fittings are used to mount the Captureboard on a
wall (See the Assembly and Setup Manual.).
(The set includes four Captureboard brackets and 16 M4
mounting screws.)
• Printer table [1 set]
The printer is placed on this printer table.
(The set includes one printer table, brackets for left and
right sides, 10 M3 assembly screws, 4 M4 screws, 2
printer guides, 2 cushions and Velcro 2 sets)
• AC adapter box (1 unit, with 2 masking screws)
Use this to store the AC power adapters of the
Captureboard and printer. (See the Assembly and Setup
Manual.)
• Cable covers specifically for the Captureboard (see
the Assembly and Setup Manual)
Model C-12S: 1 cover
Model C-12W: 2 covers