Konica Minolta magicolor plus - Manual (Page 28)

E-28
Making the Function Settings
The captureboard includes such advanced functions as the Erase Reminder function that can be set directly
using the operation buttons on the captureboard. The advanced functions can also be set from the function
settings in the "TOOLBOX" menu installed on a computer (See the separate "Software Operation Manual".)
Basic Setting Operations
• Check that the power is turned on (that the display window is lit).
• When in the Function Settings mode, the captureboard returns to the normal mode if no button is operated for 10 seconds.
Switching to the function settings mode
Press and hold in the Density button, then press
the ON/Standby button.
"F1" appears on the display window.
Selecting the function number
Press the + or – button to display the desired func-
tion number (the number changes each time one of
the buttons is pressed), then press the Save but-
ton to finalize.
See the "Table of Function Numbers, Selected Modes and
Lamp Statuses" on the following page.
Selecting the function's setting
Press the Feed button to select the function's set-
ting, then press the Save button to finalize.
When finalized, the dot next to the function number ("F3." for
example) flashes for several seconds.
• When the Feed button is pressed, the selected mode is
indicated by whether the Density mode and Color mode
lamps are on or off. For details, see the "Table of Function
Numbers, Selected Modes and Lamp Statuses".
• Function number "F1" is not used. Nothing will happen when
the Feed button is pressed.
Quitting the function settings mode
Press the ON/Standby button to return to the normal
mode.
The display window returns to the normal mode ("OP" or "PC").
Ex.: Lamp statuses when selecting the Erase Reminder function's mode
When "Enable" is selected:
Color: Unlit
Density: Lit When "Disable" is selected:
Color: Lit
Density: Unlit
Dot flashes for several
seconds
Forward / Reverse