beautypg.com

Konica Minolta magicolor plus User Manual

Page 27

background image

E-27

Using USB Memory

Deleting USB memory image files with the
computer

Before deleting important image files, be sure to save them
on the computer (as a data backup).

1. Open “My Computer” and then open the

drive icon which shows USB memory.

The folder named “CB_image” contains the memory stor-
age data of the Captureboard.

2. Place the “CB_image” folder in the “Recycle

Bin”, right click on the icon and select
“Empty Recycle Bin” from the pull-down
menu.

All of the data contained in “CB_image” will be deleted.

Even when the entire folder is deleted, a new “CB_image”
folder will be created automatically when USB memory is
used again with the Captureboard.

Disconnect the USB memory

The disconnecting procedure depends on the computer’s oper-
ating system. For details, refer to the computer’s operating
instructions or help files.

1. Click the [Hardware Removal] icon that is

displayed in the task tray.

Click “Stop USB Mass storage Device - drive (E)”. (The E
drive character will differ depending on the personal com-
puter system.)

2. Click [OK] when “The ‘USB Mass storage

Device’ device can now be safely removed
from the System” is displayed.

(When using Windows XP/Vista, [OK] does not appear on
the message screen. Simply disconnect. )

3. This allows the USB memory device to be

unplugged from the computer.

• Do not disconnect the USB memory device while the

USB memory device’s access indicator is flashing. Doing
so will damage the data.

• The USB drive may not be disconnected properly, for

example if the computer is in the process of checking the
status of peripherals.

“Remove hardware” icon (example)

Drag to the Recycle Bin

Note