Konica Minolta magicolor plus - Manual (Page 14)

E-14
Setting the Time
Set the captureboard's clock properly. The date and time are printed in the header/footer when printing and
recorded in the file data when saving the file.
Press the ON/Standby button to switch on
the power.
The LED of the display window will light and the power will
be switched on.
Press the + or – button and change to “Time
Setting”
The LED of the display window will light and display “ ”.
Preparation: Connect the captureboard's AC power plug to a wall power outlet. E-13
Example: Set the time to 2:16 pm, November 8, 2008 (2008.11.08 14:16).
Overview of the Operation
1 Switch to “Time setting”
Press the + or – button.
2 Display the day and hour setting mode
Setting mode information indicated in the display window
(First 2 digits) (Last 2 digits)
Year Month Day Hour Minute
3 Set the date and time of the setting mode
One press of the + or the − button will enable the settings to be made.
Press the + or − button and make the adjustment.
4 Press the Print button to confirm
There is a change to the next setting mode.
Repeat steps 3 and 4 to set the current time.
5 Completion
To quit the time setting mode, press the Print button.
• Pressing the ON/Standby button during operations 2 to 4 will cancel the
incomplete settings and return to the time prior to starting the settings.