Konica Minolta magicolor plus - Manual (Page 18)

E-18
Printing
Use a printer to print out the text and drawings that has been drawn on the sheet surface.
Operations and names of parts differ from printer to printer. For details of operations, see your printer’s operating
instructions.
Images projected with a projector cannot be printed.
Preparing the Printer
Please check that the Captureboard and the printer have been connected. See Page E-37.
Set the paper.
Please use A4 or letter size printer paper.
See your printer instruction manual for details.
1) Arrange the paper edges so that they are even.
2) Insert paper at the specified position of the paper tray.
3) Press the paper guide gently until it touches the paper.
See your printer’s operating instructions for a
description of the paper that can be used.
Switch on the power.
Press the power switch. The power indicator lights.
This completes the preparation of the printer.
Press the Print
button on the Captureboard’s control panel. One
page worth of data is read and the printing operation starts.
• Depending on the printer, indicators, etc., may flash after the
power is turned until the printer is prepared to print. In this
case, see the printer’s operating instructions and check that
the printer is ready before starting the printing operation on the
Captureboard.
When finished printing...
Switch off the printer power and remove the paper.
Close the paper tray.
Do not turn off the power or disconnect the USB cable during
printing.
Power switch
Paper tray
Paper guide
Paper
Paper guide
* Appearance of printer is
for illustration purposes.
Notice
Notice
Notice
Note