Selecting the printing density, Making additional copies, Cancellation of the print operation in progress – Konica Minolta magicolor plus User Manual
Page 21: Printing
E-21
Making additional copies
This will print the copy of the sheet that was scrolled previously one more
time.
Press the Reprint
button.
This starts the printing of the image data that has accumulated in internal
memory.
• The sheet is not scrolled when additional copies are made.
• In repeat printing, the color/black & white and density settings will be
the same as those of the prior printing.
• When printing or USB memory storage has not been performed since
switching on the power, image data will not have accumulated in the
internal memory and this operation will not be possible.
• If additional printing is set to "Disable" in the security function set-
tings, display number "E8" is displayed. For details, see the separate
"Software Operation Manual".
Cancellation of the print operation in progress
During the read operation (when the Print
button was pressed)
When the ON/Standby
button is pressed, the reading of the sheet stops,
the Captureboard returns to the original page and the partially read image
data is printed. Wait until the sheet is expelled from the printer.
Stopping the printing after the Print
button was pressed and the read-
ing completed
Stopping during reprinting (When the Reprint
button has been
pressed)
Press the Captureboard’s ON/Standby
button. After several seconds, print-
ing is interrupted and the sheet is expelled.
Selecting the printing density
Select this when the density of the print is light.
Press the Density
button and select darker or standard.
Density mode lamp
Lit Darker
Unlit Standard
Printing
Note