Konica Minolta magicolor plus - Manual (Page 13)

E-13
Wall outlet
Copyboard's AC power adapter
Printer's AC power
adapter
AC adaptor box
Connecting the Power
Note
About the connection and the AC adapter box
The AC power adapters of the captureboard and printer are stored in the AC adapter box.
In this manual, "AC power plug" refers to the AC power plug of either the captureboard or the printer.
If the AC power adapter is not connected or placed in the AC adapter box, see the separate " Assembly and Setup
Manual " and connect according to the purpose
To use the captureboard, connect the captureboard's AC power plug to a wall power outlet.
The main power turns on. In this manual, this is referred to as the “standby mode”.
The descriptions in this manual assume that the AC power plug is connected (that the unit is in the standby mode).
• When the AC power adapter’s power plug is unplugged from the power outlet, place the captureboard near the power
outlet so that it can be reached easily.
• The supplied AC power adapter and AC power cord are intended for exclusive use with this product. Never use them
with another product.
Notice
When not using the captureboard for long periods of time
Disconnect the AC power adapter’s power plug from the AC power outlet in the wall.
To use the printer, also connect the printer's AC power plug to a wall power outlet.
Before printing, turn on the printer's power.