Konica Minolta magicolor plus - Manual (Page 12)

E-12
2 Display window
D i s p l a y s t h e c o n n e c t i o n s t a t u s b e t w e e n t h e
Captureboard and the computer, the operational status
of USB memory storage, and error information on a 7-
segment LED.
“PC” is displayed when the Captureboard is connected
with a personal computer. Note that “OP” is displayed
when the Captureboard is not connected with a per-
sonal computer. Please see Page E-32 for details about
error information.
3 Save button (USB memory storage)
Moves a one-screen portion of sheet and reads it, then
stores the data on a USB memory.
4 Memory port (USB port Type A)
Saves in commercially-available USB memory images
that have been read by the Captureboard.
5 Feed button
Scrolls the sheet one screen portion left, then stops
automatically.
6 + / − buttons (Time Setting)
Press the + button or the − button and perform the set-
ting of the date/time. See Page E-14 for details.
7 Print button
Moves the sheet one screen portion and reads it, and
prints the image.
* Used only when there is a printer connection.
8 Reprint button
Prints the previously printed sheet surface one more
time. (The sheet does not move.)
The density and the color/monochrome selection cannot
be changed.
* Used only when there is a printer connection.
9 Density button
Selects the copying density, either “standard” or “dark”.
This function will be effective at time of printing, USB
memory storage, and personal computer storage.
Density mode lamp
When “dark” is selected, the density mode display indi-
cator will light green. This is enabled during USB mem-
ory storage, personal computer storage, or printing.
10 Color button
Selects whether to store in memory (or print) in “color”
or “black & white”.
Color mode lamp
The indicator lights green when “color” is selected.
* In accordance with the printer function when a printer
is connected.
1 ON/Standby button
Turns the Captureboard’s power on and off (standby
mode).
The function settings can be made by pressing the
Density
and ON/Standby buttons simultaneously.
For details, see page E-28.
Control Panel
When pressing a button, please press the center area (i.e., the round and protruding portion). The button may
not work if it is pressed on a corner.
Names of the Parts
Note
If the Erase Reminder function has been set, the
sheet moves to the surface that has not yet been
erased before the power turns off *1.
*1 Depending on the usage method, the Erase
Reminder function may not operate properly.