Lenovo IdeaPad U300e - Manual (Page 127)

Table 4. Config menu items (continued)
Submenu item Selection Comments
Serial ATA (SATA)
SATA Controller Mode Option • Compatibility
• AHCI
• RAID
Select SATA controller operation
mode. If your system supports
RAID, select “RAID.” If you select
“Compatibility mode,” serial SATA
controller operates in compatibility
mode.
CPU
Core Multi-Processing • Disabled
• Enabled
Enable or disable additional execution
core units within a CPU.
Note: If you are using a computer
with a single-core processor, this item
does not appear.
Intel ® Hyper-Threading Technology • Disabled
• Enabled
Enable or disable additional logical
processors within a processor core.
Intel ® AMT
Intel ® AMT Control • Disabled
• Enabled
If you select “Enabled,” Intel ® AMT
(Active Management Technology) is
configured and additional setup items
are provided in MEBx (Management
Engine UEFI Extension) Setup.
Note: You can enter MEBx Setup
menu by pressing Ctrl-P key
combination in Startup Interrupt
Menu. To display the Startup Interrupt
Menu, press ThinkVantage button or
Enter key during POST.
CIRA Timeout 0-255 Set timeout option for CIRA
connection to be established. 1
though 254 seconds are selectable.
If you select “0,” use 60 seconds as
default timeout value.
If you select “255,” waiting time for
establishing a connection is unlimited.
Console Type • PC-ANSI
• VT100+
• VT-UTF8
Select the console type for AMT.
Note: This console type should
match the Intel AMT remote console.
Security menu items
Table 5. Security menu items
Submenu item Selection Comments
Password: Refer to “Security menu” on page 104 and “Using passwords” on page 55.
Fingerprint
Chapter 8 . Advanced configuration 111