Lenovo ThinkServer TD200x - Manual (Page 67)

4. Install and lock the left-side cover (see “Completing the installation” on page
97).
5. Install the hot-swap power supplies.
6. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
Turning the stabilizing feet
To rotate the front feet, do the following:
1. Carefully position the server on a flat surface. The feet ( 1 ) should hang over
the edge of the flat surface to ease removal.
2. Press in on the clips to hold the feet in place; then, pry the feet away from the
server. In some cases, you might need a screwdriver to pry the feet from the
server.
Chapter 5. Installing optional devices and replacing customer replaceable units 51