Lenovo THINKSERVER TD230 User Manual
Page 70
4. Remove the RAID 5 key from the SATA key connector on the system board. See “Locating parts on the
Figure 47. Removing the RAID 5 key
5. If you are instructed to return the removed RAID 5 key to the manufacturer, follow all packaging
instructions and use any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 90.
Installing or removing the ThinkServer 9240-8i RAID 5 Upgrade Key
This section provides instructions on how to install or remove the ThinkServer 9240-8i RAID 5 Upgrade
Key (hereafter called the 9240-8i RAID 5 key). If your server has a ThinkServer 9240-8i RAID 0/1 Adapter
installed and you want to enable the RAID 5 configuration function for this adapter, you need to install
the 9240-8i RAID 5 key on the adapter.
Installing the 9240-8i RAID 5 key
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and
“Guidelines” on page 21. To obtain a copy of the publications, go to:
This section provides instructions on how to install the 9240-8i RAID 5 key.
To install the 9240-8i RAID 5 key, do the following:
Attention: Electrostatic discharge (ESD) can damage the 9240-8i RAID 5 key. Always ground yourself and
use a ground strap before touching the option. Perform the following procedure at an ESD-safe workstation.
60
ThinkServer TD230 Installation and User Guide