Lenovo THINKSERVER TD230 - Manual (Page 22)

Table 4. Meanings of the status LEDs on the front panel (continued)
LED State Color Description
On Green The server is linked to a local area network (LAN).
Blinking Green The LAN is active and data is being transferred.
Ethernet status
LED
Off Off The server is not linked to a LAN.
On Amber The system has error(s) and alarm(s). System status
LED
On Green The system is booted and ready.
Rear view
Figure 4 “Rear view of the server” on page 12 shows the locations of the connectors and parts on the
rear of the server.
Figure 4. Rear view of the server
1 Power cord connector 5 PCI card zone
2 Serial port 6 Ethernet connector 2
3 VGA monitor connector 7 Ethernet connector 1
4 USB connectors (4) 8 Front door key (cut the plastic clip to get the key)
Connector Description
Ethernet connector Used to attach an Ethernet cable for a LAN.
Power cord connector Used to connect the power cord.
Serial port Used to attach a device that uses a 9-pin serial port.
12 ThinkServer TD230 Installation and User Guide