Lenovo THINKSERVER TD230 User Manual
Page 3

Contents
Safety information . . . . . . . . . .
Chapter 1. General information . . . . . 1
Introduction . . . . . . . . . . . . . . . . .
Notices and statements in the document . . . . .
Related documentation . . . . . . . . . . . .
Chapter 2. Server setup road map . . . 3
Chapter 3. Product overview . . . . . . 5
What is included with your server . . . . . . . .
Features and specifications. . . . . . . . . . .
Software programs . . . . . . . . . . . . . .
EasyStartup . . . . . . . . . . . . . . .
EasyManage. . . . . . . . . . . . . . .
Reliability, availability, and serviceability. . . . . .
Chapter 4. Locating parts, controls,
LEDs, and connectors . . . . . . . . . 9
Front view . . . . . . . . . . . . . . . . .
Rear view. . . . . . . . . . . . . . . . .
Hot-swap hard disk drive status LEDs . . . . .
LEDs for the Ethernet connectors . . . . . . .
Locating server components . . . . . . . . .
Locating parts on the system board . . . . . .
Locating diagnostic LEDs on the system board . .
Jumper block settings. . . . . . . . . . . .
Locating connectors on the hot-swap hard disk
drive backplanes . . . . . . . . . . . . . .
Chapter 5. Installing, removing, or
replacing hardware . . . . . . . . . .
Guidelines . . . . . . . . . . . . . . . .
Basic guidelines . . . . . . . . . . . .
System reliability guidelines . . . . . . . .
Handling static-sensitive devices
Working inside the server with the power on .
Removing the server cover . . . . . . . . . .
Removing and reinstalling the front bezel . . . .
Locking or unlocking the hard disk drive side
door . . . . . . . . . . . . . . . . . . .
Installing, removing, or replacing optional hardware
devices
. . . . . . . . . . . . . . . . .
Installing or removing a memory module. . .
Removing or installing internal drives . . . .
Installing or removing a PCI card . . . . . .
Installing or removing the Ethernet card . . .
Installing or removing the ThinkServer TD230
SATA RAID 5 Upgrade . . . . . . . . . .
Installing or removing the ThinkServer 9240-8i
RAID 5 Upgrade Key . . . . . . . . . .
Installing or removing the ThinkServer Remote
Management Module 3 . . . . . . . . .
Installing, removing, or replacing hardware
devices
. . . . . . . . . . . . . . . . .
Removing or installing the ThinkServer 9240-8i
RAID 0/1 Adapter . . . . . . . . . . . .
Removing or installing the heat sink and fan
assembly . . . . . . . . . . . . . . .
Removing or installing a front fan
Removing or installing the rear fan . . . . .
Removing or installing the microprocessor . .
Replacing the system board battery . . . .
Completing the parts replacement . . . . . . .
Connecting the cables . . . . . . . . . .
Turning on the server . . . . . . . . . .
Updating the server configuration . . . . .
Turning off the server . . . . . . . . . .
Connecting external devices . . . . . . .
Chapter 6. Configuring the server . .
Using the Setup Utility program . . . . . . . .
Starting the Setup Utility program . . . . .
Introduction of the BIOS items. . . . . . .
Using passwords . . . . . . . . . . . .
RAID controllers . . . . . . . . . . . . . .
Using the ThinkServer EasyStartup program . . .
Before you use the EasyStartup DVD . . . .
Setup and configuration . . . . . . . . .
Configuring RAID . . . . . . . . . . . .
Typical operating system installation . . . .
Configuring the onboard SATA software RAID . .
RAID information . . . . . . . . . . . .
Starting the Intel Embedded Server RAID
Technology II program . . . . . . . . . .
Creating a RAID volume . . . . . . . . .
Initializing the RAID volume . . . . . . . .
Deleting the RAID volume . . . . . . . .
Checking the RAID 1 volume consistency . .
Configuring the Gigabit Ethernet controller. . . .
Updating the firmware. . . . . . . . . . . .
Using the EasyUpdate Firmware Updater
program . . . . . . . . . . . . . . .
© Copyright Lenovo 2010, 2013
i