Norgren Flow Controls - Manual (Page 8)

FIT-3-8 Littleton, CO USA Phone 303-794-2611 www.norgren.com
Push-In Flow Regulators
●
High flow performance
●
Suitable for panel/wall mounting and manifold
●
Adjustment can be locked
●
Captive regulator needle will not blow out when
unscrewed
●
Adjusting knob position
●
Releasable grab ring technology combining plastic
and brass components for a compact and superior
fitting design
●
Color coding option with tamper-resistant feature
●
Red release sleeve indicating metric tube sizes
●
Grey release sleeve indicating inch tube sizes
●
Reliable and corrosion resistant
T-15 Series
Inch and Metric O/D Tube
Technical Data
Medium: Compressed Air, filtered
Operation: Uni-directional
Operating Pressure:
1.5 to 145 psig (0.1 to 10 bar)
Ambient Temperature:
0° to 175°F (-20˚C* to 80˚C)
Consult our Technical Service for use below 35°F (2°C)
Mounting:
In-line. Panel mounted by hexagonal mounting nut. Wall mounted by
through-holes in regulator body. Manifold by quick connection
Alternative Models
Block form flow regulators, T1000 series
Heavy duty flow regulators, M/800, M/600
Precision flow regulators, M/650, M677 and S/790
Materials
1/8" (3mm), 5/32" (4mm), 3/16" (5mm), 1/4" (6mm),
5/16" (8mm), 3/8" (10mm)
Body: plastic PBT
Seals: silicone free nitrile seal, external metal parts: nickel plated brass
Internal parts: brass
Spring: stainless steel
Grab ring: stainless steel, BS 1440 Pt 2, grade 301.S21
Knob and panel nut: plastic POM
3/16" (5mm), – 1/2" (12mm)
Collet: nickel plated brass
Ordering Information
To order, quote model number from table on page
FIT-3-9, e.g. T15Y0004 to order 1/4" model.
ISO Symbol
1 2