Norgren Flow Controls - Manual (Page 23)

Littleton, CO USA Phone 303-794-2611 www.norgren.com FIT-3-23
● Compact size
● Easy tube insertion for rapid assembly of
pneumatic circuits
● Push-in and threaded ports
● Optimum pressure utilization
● Safer pneumatic systems
● Hex key adjustment and locking ring
● Relieving
Technical Data
Fluid: Compressed air, nitrogen, inert and non-combustible gases
compatible with materials of construction.
Note:
For other types of fluids or compressed gases, please
consult factory.
Operating Pressure:
Primary (inlet) pressure 0 to 150 psi (0 - 10 bar)
Maximum secondary (regulated) pressure 115 psi (8 bar)
Operating Temperature:
0° to 175°F (-20° to +80°C)
Outlet Port:
5/32'', 1⁄4'', 5/16'', 3⁄8'', 1/2” O.D. tube Push-in Fittings
1/8, 1⁄4, 3⁄8, 1/2 NPTF Threaded Ports
4, 6, 8, 10mm O.D. tube Push-in Fittings
Inlet Port:
1/8, 1⁄4, 3⁄8, 1/2 NPTF Thread
1/8, 1⁄4, 3⁄8, 1/2 ISO G Thread
Tubing Types:
Nylon 11 or 12, polyurethane (95 durometer or above)
LDPE (Low Density Polyethylene)
Materials
Nickel plated brass body
Nickel plated brass collet
Plastic sealing washer
Nitrile and polyurethane elastomeric parts
Zinc plated brass banjo bolt
Function Fittings and Flow Controls
Pressure Reducing Fitting
Inch and Metric
Ordering Information
To order, quote appropriate product number
from the tables on the following pages.
Product numbering system is designed to
make identification and selection simple:
1 2 _ _ _ _ _ _ _
Series
Number Type Shape Tube Size/
Thread Size Thread Size/
Tube Size
2
1
124GB
124GB
Port 1
Port 2