MSI X2-109 v2 - Manual (Page 81)

A-3
Intel ICH9R SATA RAID
BIOS Configuration
After the above message shows, press and keys simultaneously to enter
the RAID Configuration Utility.
Important
The “Driver Model”, “Serial #” and “Size” in the following example might be
different from your system.
Important
The following procedure is only available with a newly-built system or if you
are reinstalling your OS. It should not be used to migrate an existing system
to RAID.
The Intel Matrix Storage Manager Option ROM should be integrated with the system
BIOS on all motherboards with a supported Intel chipset. The Intel Matrix Stroage
Manager Option ROM is the Intel RAID implementation and provides BIOS and DOS
disk services. Please use + keys to enter the “Intel(R) RAID for Serial ATA”
status screen, which should appear early in system boot-up, during the POST
(Power-On Self Test). Also, you need to enable the RAID function in BIOS to create,
delete and reset RAID volumes.
Using the Intel Matrix Stroage Manager Option ROM
1. Creating, Deleting and Resetting RAID Volumes:
The Serial ATA RAID volume may be configured using the RAID Configuration utility
stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the
following message will appear for a few seconds:
9265v1.0-A(ICH9R SATA RAID).p65 2008/5/15, 上午 11:44 3
PDF created with pdfFactory Pro trial version www.pdffactory.com