MSI X2-109 v2 - Manual (Page 68)

3-16
M S-9265 Server
BMC LAN Configuration
Use these settings to set up the IP address, gateway, and IP subnet mask for
your system network.
Remote Access Configuration
Remote Access
The setting enables/disables the remote access function. When set to [Enabled],
users may configure the following settings for remote access type and
parameters.
Serial Port Number, Base Address, IRQ, Serial Port M ode
Use these settings to configure ports for remote access.
Flow Control
Flow control is the process of managing the rate of data transmission between
two nodes. It’s the process of adjusting the flow of data from one device to
another to ensure that the receiving device can handle all of the incoming data.
This is particularly important where the sending device is capable of sending
data much faster than the receiving device can receive it.
9265v1.0-3.p65 2008/5/15, 上午 11:44 16
PDF created with pdfFactory Pro trial version www.pdffactory.com